New Jersey commercial energy rebates: what the utilities pay toward HVAC
New Jersey commercial energy rebates for HVAC in existing buildings are mostly run by your electric and gas utilities under state oversight, and the pathway your building falls into sets how the amount is calculated. Typical incentives run 50–80% of total project cost, with most projects landing at up to 70%. The final number depends on your utility tier and the building's energy usage.
Typical range
50–80%
of total project cost
Most projects
up to 70%
covered
Available in
New Jersey
all 21 counties
Final incentive depends on your utility tier and the building's energy usage. Program schedules change by program year, so we confirm current figures against your utility at survey; the table below shows how each program sets its amount, not a quote for your building.
All of it runs through one statewide framework — New Jersey's Clean Energy Program, and the pathway your building falls into decides whether you are looking at a fixed equipment rebate or a modeled six-figure number. Direct Install, 0% repayment and the state grants are set side by side in our guide to New Jersey HVAC assistance programs.
New Jersey commercial rebate programs at a glance
The utility programs that pay toward HVAC in existing commercial and multifamily buildings. Each row links to our page on it and to the program's official source.
| Program | Who it's for | How the amount is set | Our page | Official source |
|---|---|---|---|---|
| Direct Install | Small and mid-sized businesses, nonprofits, municipalities, schools and faith-based organizations, up to 300 kW of peak demand or 40,000 therms a year | Up to 80% of project cost in Tiers 1 and 2 and up to 70% in Tier 3; utilities may cap the dollars. The utility's participating contractors do the assessment and the work. | HVAC assistance programs | BPU Triennium 2 order |
| Prescriptive | All commercial, industrial and other non-residential customers | A set incentive for each qualifying unit | Rebate applications | BPU Triennium 2 order |
| Custom | All commercial, industrial and other non-residential customers | Calculated from the building's modeled energy savings; approval is needed before equipment is bought | How incentives are calculated | BPU Triennium 2 order |
| Engineered Solutions | Hospitals, colleges and universities, school districts, municipalities, multifamily apartments and large commercial and industrial buildings | Tier 1: 100% of an up-front audit, plus a buydown of the project's simple payback by up to six years, to no less than three. Tier 2: up to 60% of project cost for most customers. | NJ Clean Energy Program | BPU Triennium 2 order · PSE&G |
| Utility multifamily programs | Apartment buildings with three or more units | Set by each utility. South Jersey Gas pays $375 to $1,750 per unit on its whole-building pathway, tiered by savings; PSE&G adds no-cost energy assessments. | Multifamily buildings | PSE&G · South Jersey Gas |
| On-bill repayment and 0% financing | Customers using the utility programs above | Not an incentive: it spreads the balance left after the incentive, interest-free in most territories. FirstEnergy's own page lists up to 2.99% for JCP&L commercial customers, so confirm the rate. | Commercial HVAC financing | PSE&G repayment FAQ · FirstEnergy (JCP&L) |
Utility program status checked October 2026.
Outside these utility programs, the state runs its own: new buildings and major gut renovations go through the New Construction Program, and NJEDA runs the NJ Cool and RETROFIT NJ grants (check each for whether applications are open) and Garden State C-PACE financing.
What are these incentives actually paying for?
Energy savings, not equipment. The utility is buying a reduction in what your building draws off the grid, and the payment is sized to how big that reduction is.
That single fact explains everything else about how the programs behave. It is why an ancient, oversized boiler is a better candidate than a merely dated one; why heat pumps attract the largest incentives, because they replace two inefficient systems at once; and why new construction is left to a separate state program — there is no wasteful baseline to improve on.
It is also why the process starts with a survey and an energy model rather than a price list. Until somebody has measured what your building currently uses, nobody can tell you what the incentive will be.
Which utility program applies to my building?
Whichever utility bills you for electricity — which is determined by territory, not by your town's name.
Territory boundaries do not follow municipal lines, and several New Jersey counties are split between two providers. The reliable answer is on the top of your electric bill, which is the first thing we ask for.
Gas is a separate map again. A building can be on PSE&G for electricity and New Jersey Natural Gas or Elizabethtown Gas for fuel, and a project touching both sides can qualify under both.
What do we have to do?
Provide your latest electric bill, your latest gas bill, access to walk the building, and a decision on scope. The application, the modeling and the utility coordination are ours.
Both fuels matter because most New Jersey buildings are served by two different companies, each running a separate program. If your gas bill is missing we can only model the electric half of the project, and on a boiler replacement that is the smaller half.
The paperwork after that is the reason most buildings never do this work. It is genuinely the hardest part and it is entirely administrative — which makes it exactly the right thing for us to absorb rather than hand back to a facility manager who already has a full job.
| Utility | Fuel | Territory |
|---|---|---|
| PSE&G | Electric + gas | North and central NJ, parts of the south |
| JCP&L | Electric | Shore, northwest, parts of central |
| Atlantic City Electric | Electric | South Jersey and the southern shore |
| Rockland Electric | Electric | Far northern Bergen and Passaic |
| New Jersey Natural Gas | Gas | Monmouth, Ocean, Morris, parts of Burlington |
| South Jersey Gas | Gas | Atlantic, Cape May, Cumberland, Salem, Gloucester |
| Elizabethtown Gas | Gas | Union, Warren, Hunterdon, Sussex, parts of Middlesex |
Electric utilities
PSE&G
Northern and central New Jersey, plus parts of the south
New Jersey's largest utility. Most of the north and center of the state.
JCP&L
Shore, northwest and parts of central New Jersey
The shore, the northwest, and a large slice of the center.
Atlantic City Electric
Southern New Jersey and the southern shore
South Jersey and the shore, where hospitality dominates.
Gas utilities
New Jersey Natural Gas
Monmouth, Ocean, Morris and parts of Burlington
The shore and central counties. Gas-side incentives for heating work.
South Jersey Gas
Atlantic, Cape May, Cumberland, Salem, Gloucester and parts of Camden and Burlington
South Jersey's gas utility. Pairs with Atlantic City Electric on most projects.
Elizabethtown Gas
Union, Warren, Hunterdon, Sussex and parts of Middlesex and Mercer
Union, the northwest, and parts of the center. Gas-side heating incentives.
Rebates by equipment
What qualifies, and what does not, for each class of equipment we replace.
Where this connects across the site
Common questions
Do we have to pay upfront and claim it back?
No. The incentive is built into the project structure rather than reimbursed to you afterwards. We establish the approved amount before work is scheduled.
Is this the same as a homeowner assistance program?
No. Income-based home programs such as Comfort Partners and the Weatherization Assistance Program are separate. We work on commercial and multifamily buildings only.
Does new construction qualify?
Not for the utility programs on this page, which replace inefficient equipment in existing buildings. New buildings and major gut renovations go through the state's separate New Construction Program, and we work only on existing buildings.
What if we lease the building?
The incentive follows the utility account holder, which in a leased building is not always the party who started the conversation. We settle that before scoping.
Is there a minimum project size?
There is no fixed floor. What matters is the size of the energy saving, which is what the survey and the energy model establish.
How long does the process take?
It varies by utility, program year and project size. We give you a realistic timeline once the survey is done rather than a generic promise up front.
Sources
- NJ BPU, Atlantic City Electric Triennium 2 order (Oct. 30, 2024)Direct Install tiers and the Prescriptive, Custom and Engineered Solutions program design for the current utility program cycle, which runs through June 30, 2027.
- PSE&G, Engineered Solutions ProgramEligible customers include hospitals, colleges and universities, school districts, municipalities, multifamily apartments, other nonprofit and public entities, and large commercial and industrial entities.
- PSE&G, Multifamily ProgramNo-cost energy assessments for buildings with three or more units, plus rebates and on-bill repayment.
- South Jersey Gas, Multifamily Program$375 to $1,750 per unit on the whole-building pathway, tiered by savings, for projects that cut energy use at least 5%.
- PSE&G, On-Bill Repayment FAQCovers the customer's share of costs not covered by incentives, repaid on the PSE&G bill interest-free over five years.
- FirstEnergy (JCP&L), New Jersey financing optionsCommercial financing on the Prescriptive and Custom programs at up to 2.99% interest.
- NJ BPU press release, Oct. 21, 2025Announces the New Construction Program for new construction and major renovation projects across the residential, multifamily, commercial and industrial sectors, including major gut rehabilitations that meet its criteria.
Find out what your building qualifies for
The only way to get a real number is a survey and an energy model. Start with a call.