RIVETEnergy
PSE&G territory

PSE&G Commercial HVAC Rebates in New Jersey

PSE&G pays commercial and multifamily HVAC incentives covering 50–80% of project cost, calculated from the modeled energy saving rather than from the equipment itself. It is the largest utility in New Jersey and serves the densest part of the state's commercial and multifamily stock, so if your building sits in the north or center this is most likely the program your project runs through.

Typical incentive

50–80%

of total project cost

Counties served

Bergen · Essex · Hudson · Union · Passaic · Middlesex · Somerset · Mercer · Camden

What kind of projects does PSE&G support?

Commercial and multifamily energy-efficiency retrofits — replacing existing, inefficient equipment with high-efficiency equipment. The incentive is calculated from the projected energy saving.

That framing matters more than the equipment list. These are not equipment discounts. They are payments for the saving your building will produce, which is why the survey and the energy model come before any pricing conversation.

It also means the worse your current equipment is, the better your project performs. An oversized 1980s atmospheric boiler is a stronger candidate than a fifteen-year-old unit that was decent when installed.

Does the building have to be old?

It has to be an existing building with equipment worth replacing. New construction goes through the state's separate New Construction Program instead; these utility programs exist to fix what is already in the ground.

Who applies?

We do, on your behalf. The application, the energy modeling and the utility coordination are our scope, not yours.

The one thing we need from you early is the utility account information, because the incentive follows the account holder. In a leased building that is not always the party who initiated the conversation, and it is worth settling before the project is scoped.

What PSE&G pays for commercial HVAC in 2026

PSE&G's commercial rate card, effective August 3, 2026, pays $300 per ton for air-cooled rooftop and split air conditioners up to 20 tons and $200 per ton for central DX units above 20 tons, and PSE&G advertises 50% or more increased incentives on eligible prescriptive equipment through December 31, 2026.

The same rate card pays air-source heat pumps of 5.4 tons or less $175 per ton at Tier 1 and $300 per ton at Tier 2, and $300 per ton from 5.4 to 20 tons. Ductless mini-split heat pumps earn $250 per ton, water-source heat pumps $300 per ton and ground-source heat pumps $500 per ton. Packaged terminal heat pumps earn $300 per ton and packaged terminal air conditioners $175 per ton.

PSE&G also supplies gas, so it pays for boilers too: $1,000 per boiler for condensing hot-water boilers under 300 MBH, $4 to $5 per MBH for larger condensing boilers at 88% thermal efficiency, and $9 per MBH for ENERGY STAR condensing boilers.

These are prescriptive rates for equipment that meets the card's efficiency tiers. Custom and Engineered Solutions projects are paid on the modeled saving instead, which is where the 50–80% range comes from. Rates change by program year, so we confirm the current card for each project before it is priced.

Official program source

PSE&G business efficiency programs →

Program schedules change by program year. We confirm current figures against the utility at survey rather than quoting from a table that may be out of date.

Common questions

Is my building in PSE&G territory?

Check the top of your electric bill rather than assuming from your town — territory boundaries do not follow municipal lines.

Can PSE&G gas and electric incentives stack?

PSE&G supplies both gas and electric across much of its territory, and projects touching both can qualify on both sides. That is assessed per project.

How long does approval take?

It varies by program year and project size. We give you a realistic timeline once the survey is complete rather than a generic one up front.

Does PSE&G pay commercial and multifamily HVAC rebates?

Yes. PSE&G's commercial program pays prescriptive rebates per ton for rooftop units, heat pumps and through-wall units and per MBH for boilers, and its custom and Engineered Solutions pathways pay on the modeled energy saving. Multifamily buildings qualify, including common-area and in-unit equipment.

Find out what your building qualifies for

A survey and an energy model tell you the real number. That is a phone call, not a commitment.

Get a free quote

Commercial and multifamily buildings in New Jersey. No obligation.

Or call (848) 261-9510

We use your details only to reply to this request. See our privacy policy.

CallText